|
|
Power Management |
|
 |
|
|
Depending upon your
application and its
requirements, there are
four basic ways to
manage and communicate
with your UPS:
Single UPS: Network
card
You can usually monitor
a single UPS through an
optional network card.
Our network cards are
essentially their own
servers, so they record
event history, send
email and text message
alerts, and provide
remote access to
real-time status. Using
a network card is
usually the best way to
manage one UPS.
Shutdown: Network
card and Intelligent
Power Protector (IPP)
If your UPS is
protecting servers, you
can use our software to
schedule safe shutdowns
and prevent data loss in
the event of a prolonged
power outage. For an
Eaton UPS with a network
card, IPP is the Eaton
shutdown agent.
IPP
communicates directly
with the network card
(or over USB and serial
if needed) to register
itself and receive
alerts to initiate soft
shutdown of your IT
systems.
Multiple UPS
installations:
Network cards and
Intelligent Power
Manager (IPM)
For
multiple UPSs spread out
across a network closet,
campus or enterprise,
IPM software is designed
to aggregate and manage
your power devices (both
UPSs and network-enabled
ePDU products).
Virtualisation:
Network card and IPM
IPM
is the industry leader
integrating power with
virtualisation
platforms. The IPM
shutdown agent
management enables safe
shutdown of virtualized
servers —even
servers in clusters
running vCenter or
XenCenter. Live
migrations can be
triggered to
transparently move
virtual machines to an
available server on the
network, for data
integrity and zero
downtime.
|
|
|
| |
Software:
|
|
|
|
|
-
Remotely
monitor
and
manage
multiple
UPS
and
ePDU
devices
across
your
network
from
a
single
interface
—
any
PC
with
a
Web
browser
or
your
vCenter™
or
XenCenter™
dashboard.
-
Instantly
access
critical
information,
such
as
UPS
battery
condition,
load levels and battery runtime.
-
Measure
power
consumption
and
kWh
to
help
calculate
power
usage
effectiveness
(PUE).
-
Integration
with
virtualization
platforms
increases
productivity
and
operational
responsiveness.
-
Trigger
migration
applications
to
transparently
move
virtual
machines
to
an
available
server
on
the
network,
for
data
integrity
and
zero
downtime.
-
Shutdown
agent
management
enables
safe
shut
down
of
servers
—
even
servers
in
clusters
running
vCenter
-
Auto
discovery
provides
fast
installation
by
automatically
detecting
devices
on
the
network
-
Mass-upgrading
of
firmware
capability
reduces
network
management
card
setup
and
maintenance
time
-
Power
device
asset
management
allows
for
tracking
of
equipment
moves,
adds
and
changes
-
Compatible
with
ESXi,
SCVMM,
XenCenter
and
KVM
|
|
|
|
|
-
-
Helps you avoid data
loss by gracefully
shutting down
computers and
-
servers powered by a
UPS during an
extended power
outage.
-
-
Easy-to-use
interface from any
PC with a Web
browser.
-
-
Watchdog
functionality
reboots hung-up
machines in kiosks.
-
-
Redundancy
monitoring/management
capability for
dual-cord servers
-
helps maximize
uptime.
-
-
Acquires UPS
information through
local or network
communication and
-
can be easily
deployed on many
computers.
-
-
Can be remotely
managed, configured
and updated with
Eaton’s
-
Intelligent Power
Manager.
-
-
Compatible with ESXi,
Hyper-V, XenServer
and KVM.
|
| |
|
|
|
|
-
|
|
Eaton
UPS
Companion
main
features
:
-
Safe
system
shutdown.
-
Energy
use
and
energy
cost
reporting.
-
Easy
access
to
UPS
status
and
events.
-
Configuration
of
UPS
parameters.
-
Multiple
language
support.
-
Automatic
software
updates.
Eaton
UPS
Companion
is
compatible
with the
following
Eaton
UPS:
-
Eaton
3S.
-
Protection
Center.
-
Protection
Station.
-
Ellipse
ASR.
-
Ellipse
ECO.
-
Ellipse
MAX.
-
Nova
AVR.
|
|
|
|
 |
Network
Management Card
Download Link |
|
|
|
Depending upon your
application and its
requirements, there are
four basic ways to
manage and communicate
with your UPS: |
|
|
-
Single UPS: Network
card
You can usually
monitor a single UPS
through an optional
network card. Our
network cards are
essentially their
own servers, so they
record event
history, send email
and text message
alerts, and provide
remote access to
real-time status.
Using a network card
is usually the best
way to manage one
UPS.
-
Shutdown: Network
card and Intelligent
Power Protector (IPP)
If your UPS is
protecting servers,
you can use our
software to schedule
safe shutdowns and
prevent data loss in
the event of a
prolonged power
outage. For an Eaton
UPS with a network
card, IPP is the
Eaton shutdown
agent.
IPP
communicates
directly with the
network card (or
over USB and serial
if needed) to
register itself and
receive alerts to
initiate soft
shutdown of your IT
systems.
-
Multiple UPS
installations:
Network cards and
Intelligent Power
Manager (IPM)
For multiple UPSs
spread out across a
network closet,
campus or
enterprise,
IPM
software is designed
to aggregate and
manage your power
devices (both UPSs
and network-enabled
ePDU products).
-
Virtualization:
Network card and IPM
IPM is the industry
leader integrating
power with
virtualization
platforms. The IPM
shutdown agent
management enables
safe shutdown of
virtualized
servers—even servers
in clusters running
vCenter or XenCenter.
Live migrations can
be triggered to
transparently move
virtual machines to
an available server
on the network, for
data integrity and
zero downtime.
|
|
List
of
cards
:
Network Card-MS
The Eaton Network Card-MS allows an Eaton UPS to directly connect to the Ethernet network and the Internet, supporting real-time monitoring and control of UPSs across the network via a standard Web browser, SNMP-compliant network management system or power management software.
Function: Web/SNMP
Works with: 5P, 5PX, 9130, 9PX, Evolution, EX, 9E
ConnectUPS-X Web/SNMP Device
The ConnectUPS-X is a network card for Powerware and Eaton series UPS systems that enable remote monitoring and provide HTTP, SNMP, SMTP, WAP, Telnet, SSL, SSH compatibility and advanced RS232 communications.
Function: Web/SNMP
Works with: 5115RM, 5125, 9155, BladeUPS, 9315, 9355, 9390, 9390IT, 9395
ConnectUPS-BD Web/SNMP Device
The ConnectUPS-BD is a network card for Powerware series Eaton UPS systems that enable remote monitoring and provide HTTP, SNMP, SMTP, WAP, Telnet, SSL, SSH compatibility and advanced RS232 communications.
Function: Web/SNMP
Works with: 9130, 9170+
ConnectUPS-E Web/SNMP Device
The ConnectUPS-E is a network card for Powerware series Eaton UPS systems that enable remote monitoring and provide HTTP, SNMP, SMTP, WAP, Telnet, SSL, SSH compatibility and advanced RS232 communications.
Function: Web/SNMP
Works with: legacy 9150, legacy 9305
Power Xpert Gateway PDP Card
Eaton’s Power Xpert Gateway PDP Card (the replacement for the Power Xpert Gateway Series 1000 card) provides Web-enabled, real-time monitoring of three-phase Eaton Power Distribution Units and Eaton Remote Power Panels for power quality status and fast response to power-related events.
Function: Web/SNMP
Works with: PDU, RPP, PDR, EMS Upgrade Kit, RPM
Power Xpert Gateway UPS Card
Eaton’s Power Xpert Gateway UPS Card (the replacement for the Power Xpert Gateway Series 2000 card) provides Web-enabled, real-time monitoring of select three-phase Eaton UPSs for power quality status and fast response to power-related events.
Function: Web/SNMP
Works with: 5115RM, 5125, 9155, BladeUPS, 9315, 9355, 9390, 9390IT, 9395
Eaton Modbus Card
The Eaton Modbus Card is an X-Slot UPS connectivity device that provides continuous, reliable and accurate network monitoring of a UPS system through a Building Management System (BMS).
Function: Modbus
Works with: 5115RM, 5125, 9155, BladeUPS, 9315, 9390, 9390IT, 9395
Network and MODBUS Card-MS
The Eaton Network and MODBUS Card-MS combines an SNMP agent, HTTP/Web server and a MODBUS card — providing continuous, reliable and accurate remote monitoring of a UPS system through a Building Management System (BMS), Industrial Automation System (IAS) or any network monitoring system using SNMP and traps, or any web browser.
Function: MODBUS
Works with: 9130, EX, 9E
Expansion Chassis
With the Eaton Expansion Chassis, users may easily configure a UPS-based power management system that supports the chosen network protocol.
Function: Modbus
Works with: 5115RM, 5125, 9155, BladeUPS, 9315, 9390, 9390IT, 9395
Relay Card-MS
The new Relay Card-MS replaces select Relay cards. The card provides a simple way to remotely deliver UPS information to an alarm system, PLC or computer system via dry contacts (relay), or it can be an RS232 interface for connection to a PC or a UPS control display unit.
Function: Relay
Works with: 5P, 5PX, 9PX, Evolution, EX
X-Slot Relay Interface Card
Communications and control software are at the heart of any reliable power quality solution.
Function: Relay
Works with: 5115, 5125, 9155, BladeUPS, 9315, 9390, 9390IT, 9395
BestDock Relay Interface Card
Communications and control software are at the heart of any reliable power quality solution.
Function: Relay
Works with: 9130, 9170+
Eaton Environmental Rack Monitor
Continuously monitor environmental data center conditions at the UPS system rack level—ensuring power quality and power management of temperature and humidity at two locations in a rack and the status of up to four additional contact sensor devices—to protect data center and UPS equipment from potentially damaging conditions and ensure the best UPS power quality.
Function: Environmental monitoring
Environmental Monitoring Probe
The Eaton Environmental Monitoring Probe (EMP) enables you to remotely monitor environmental conditions as easily as you monitor power conditions.
Function: Environmental monitoring
Works with: 5115RM, 5125, 5P, 9130, 9PX, 9155, BladeUPS, 9315, 9355, 9390, 9390IT, 9395, Evolution, EX
|
|
| |
|
| |
|
|
|
